Well, I didn't drive to Iowa yesterday. I am flying out tonight. The group I'm consulting with moved my presentation from yesterday to today. It has messed some things up, but....oh well!
I thought I'd take a minute today to show you a project I finished for Sweet Pea. Remember the other day when I gave you a sneak peek, and some of you were making guesses at it?
Well, here is the big reveal....
Tah dah!!!! It's a little basket for her to carry her Bitty Baby in. It's cute, huh?! The fabrics are all from JoAnn's. I decided since this was going to be a toy for her, I was not going to use expensive quilting cotton. :-) I think Sweet Pea picked out great fabrics.
It's actually meant for a real baby, but I thought it would be perfect for her little doll. I was right. It's perfectly sized for Bitty Baby. And Sweet Pea loves it!
All of this was done on my embroidery machine. It's a machine embroidery design by Shelly Smola, My Fair Lady called Baby Baskets. You can see more information about it here. Each piece between the pink "lattice" is a "block" that is made and quilted in the embroidery machine. (Shelly of Prairie Moon Quilts, if you are reading this, I was wondering if each of these counts as a "block" for the 350 blocks project....) After you make all the blocks, you put them together using the pink "binding" strips.
I love the little canopy over the top. Sweet Pea said she loves that, too, because it keeps the sun off Bitty Baby's face. LOL. There is some Peltex in the canopy to keep it from collapsing. Pretty clever.
I used some of the scraps to make this little pillow to go with the basket. In the embroidery design, Shelly provides two appliqué designs and pillow patterns to go with the basket. One appliqué design is of a bassinette and the other is a train. Since we had this owl fabric, I went online and found this cute owl applique and substituted that for the design on the pillow. It is from SWAK Embroidery. The design is called Owl Branch Appliqué and came with four differnet sizes of owls. I used Shelly's instructions to complete the rest of the pillow though. And I quilted the pillow myself (front and back), since I was using a different embroidery design as my motif...and mine didn't come with the quilting in the embroidery design. But that's okay. I need the practice in free motion quilting! LOL.
Here is the back of the pillow I think it's pretty cute, if I do say so myself! For all of the white quilting stitches on the pillow and side pieces, I used Aurifil thread. Specifically, I used the 28 wt white. I thought it worked perfectly for this.
The "bunting" around the sides was also appliquéd in the hoop. There
is a second version of the bunting included in the embroidery design that is more "chevron" style if you
prefer that...maybe for a boys version. Very fun. For all the satin stitching on the buntings and the owl pillow, I used Floriani embroidery thread. I love the sheen and colors with Floriani for machine embroidery.
You can see how well Bitty Baby fits int here. You know what the next thing Sweet Pea will want is, right? A quilt for the baby! LOL. Actually, she's already asking me for two more of these for her bitty baby twins, one of which is a boy and one of which is a girl. We'll see if I'm up for that. haha.
As far as a pattern review:
The blocks stitched out beautifully and easily. Shelly provides incredible step-by-step instructions with lots of diagrams to help. Her instructions are just impeccable. Everything also went together really nicely. Everything fit, and the binding strips were just right for attaching everything. I also love the little flange going around the edges.
A few of tips I will give you if you make this--these are things I learned along the way:
- Cut your appliqué strips for the bunting 7.5" long, not 5.5" long or they won't be long enough. I think that's a typo in the pattern. I emailed Shelly about it, and she'll may update the pattern by the time you read this.
- When cutting the fabric to cover the handles, I would recommend cutting your strips 3" wide instead of the measurement included in the pattern. I had a hard time holding the fabric as I sewed it around the cord. I thought having the fabric wider helped me sew it better. After I sewed it, I cut the seam allowance down to about 1/4" to reduce bulk. But having that extra fabric while sewing gave me something to hang onto.
- I did add some Peltex in the bottom and around the sides to give it more structure. It really didn't need it too much...the stabilizer and batting give it some firmness. However, since it would get a lot of play, I thought it would be useful. There was enough leftover Peltex to trace around the base and cut out an oval to go between the outer and inner piece. I didn't sew it in, I just sandwiched it in there. I used some of the scraps and added a little more that I had laying around the house to form the sides. I cut pieces 4" tall by whatever lengths I had. I butted the edges up together and zigzagged over them to hold them together until I had about 54" in length (by 4" tall). I inserted it around the edge and got the right measurement I needed to fit inside, then butted up the ends and zigzagged it into a ring. Again, I just inserted it between the inner and outer piece before sewing the top seam.
- I had to do a little thinking about how to place my fabric in the hoop to make sure all the motifs were going in the same direction. There are a few tricks to doing that. I would recommend a nondirectional fabric if you're not up to that task. Or drop me a line. I can tell you how I rotated the fabric for each of the blocks. I wrote it down and can tell you how I did it if you can't figure it out.
- The last seam you sew is just along the bottom of the blue binding piece to sew the outside to the inside, capturing the flange on the inside. I pinned really carefully all the way around so that the bottom of the outer blue binding was lined up exactly with the bottom of the inner blue binding. My intention was for the needle to be "in the ditch" on both the inside and outside. I did great on the outside. But on the inside, it was a different story. If you look in the photo below, you can see inside the canopy that I wasn't too successful! You can see the stitching fell right in the middle of the blue binding along part of the canopy and down the side. I'm not sure why that happened. I think there was enough thickness that when I pinned it, it tended to distort things. In fairness, that extra thickness may not have been there if I had not put the Peltex along the sides. If I had it to do over again, I would try using my Clover binding clips to hold things together instead of pins. I think the would work better. Plus, I bent a lot of pins. LOL. Peltex strikes again.
Overall, this was a super fun project, and I think really successful! It's not perfect. I can see some things I could have done a better job on. But Sweet Pea loves it, and that's what really matters! Sweet Pea loved picking out the fabrics, she was happy to let me sew on this, and she is super happy with the outcome. Once, as I was sewing, Sweet Pea said, "Gee, I wish you were making this for me instead of some other kid. Oh, wait, this is for me!" Haha. I thought that was pretty funny.
This is a really fun project and would make a nice baby gift for someone. It also makes a great gift for a little girl who loves her baby dolls! Hope you enjoyed this pattern/project review! By the way, Shelly has lots of neat in-the-hoop designs...other baby stuff, quiet books, Kindle covers, and all kinds of other beautiful designs. I love her little in-the-hoop train line. Really cute (for those of you with boys to sew for)! I just love her work. Check out her site: My Fair Lady Designs.
Okay....I'm off to try that flight to Iowa again!
Until next time,
Notice: I purchased these embroidery designs with my own money, as well as all the fabric and supplies. I was not asked to write this review by Shelly or anyone else. It is just my opinion and experience with the design.
Super Cute! I am not showing this idea to my 5 year old! I think it is beyond my skills. :)
Posted by: Maureen | March 06, 2013 at 01:04 PM
So, so cute! I love the fabrics!
Posted by: Michele | March 06, 2013 at 01:55 PM
What a cute project! Sweet Pea picked some great fabric and I love the cute owl embroidery you found for the pillow.
Posted by: Deb | March 06, 2013 at 02:32 PM
OMG that is adorable. I want to make one for each of my great granddaughters! I bet Sweet Pea thinks you're the best mom ever! I bet she's right!
Posted by: Caroll | March 06, 2013 at 02:38 PM
Impressive. That's all.
Posted by: Jana | March 06, 2013 at 03:27 PM
Aww. That turned out so cute/pretty. You really did an excellent job. Really great work. I'm so glad Sweet Pea have something so pretty for her dolls.
Posted by: Linda in Calif. | March 06, 2013 at 03:55 PM
Wow! I never even imagined there were patterns like that--where the embroidery assembles it! Very cool. Love the fabrics too. Just don't think my boys would be interested in a baby bed. :)
Posted by: Ellie Q | March 06, 2013 at 05:51 PM
Stephanie, this is just too cute!!!! You are such a good mother. I'm sure your daughter just loves it. Safe travels.
Posted by: Rene' | March 06, 2013 at 06:53 PM
Very cute! I have used Clover Wonder clips instead of pins on a couple of bags that were too thick for pins. I highly recommend them! They hold well and are easy to put on and take off.
Posted by: Lynn | March 06, 2013 at 09:21 PM
Adorable for Bitty Baby! Every little girl needs one of these for her babies. The fabrics Sweet Pea chose are so cute. You did a great job on the basket and the cute pillow.
Hugs,
Donna
Posted by: Donna | March 06, 2013 at 10:10 PM
totally cute and adorable! I bet your daughter will remember this special baby basket for ever!
Susie
Thanks for your tips. I am going to check this pattern out!
Posted by: Susie | March 06, 2013 at 11:11 PM
Wow! That's ADORABLE Mama Pea! It makes me want a little girl to sew for -- what a cute, cute idea!!!
Posted by: Thimbleanna | March 07, 2013 at 08:48 AM
That is AMAZING!!! I don't think I have ever seen anything so cute for a doll baby - even on American Girl. It is beautiful! And I love the fabric! Sweet Pea sure has her mom's talent for picking out fabrics. I was just thinking, if you wanted to make something for a certain little cousin of Sweet Pea's who lives in the Boston area, that would sure be a cute Christmas present idea. She still loves her baby dolls too. Anyway, I think that is about the cutest thing I have ever seen Good job, Mama Pea!!
Posted by: PegVan | March 07, 2013 at 06:05 PM
How cute! Wishing I had a little girl to make one for!
Posted by: Maggie Szafranski | March 08, 2013 at 07:10 AM
Wow. This is so great! My mom just made beds for each of my daughters' babies so I won't be copying you, but yours is GREAT!!
Good job, Mom! :)
Posted by: April | March 08, 2013 at 03:37 PM
Oh, my goodness! Your little one must be so very excited about this darling basket for her dolly! You are an awesome mommy!!
Posted by: Carla | March 09, 2013 at 01:06 AM
Oh, my gosh, how cute! Bitty Baby is a pretty lucky doll to be carried around in such an adorable basket. And Sweet Pea is a lucky girl to have a mom like you.
Posted by: Kim | March 10, 2013 at 01:12 PM
That is adorable! And yes, it's so much work, you can count those as blocks. Just let me know how many. I'll bet Sweet Pea just loves it!
Posted by: Shelly | March 19, 2013 at 03:37 PM
Oh my - the detail! Any little girl would love this. I would have loved it as a little girl. You're the best mommy in the world!
Posted by: kathy olkowski | March 24, 2013 at 07:23 PM